Products from Husqvarna

Husqvarna
Close filters
1 From 3
No results were found for the filter!
Swingarm-bushings 20 x 26 x 47,5 twinshock pair Swingarm-bushings 20 x 26 x 47,5 twinshock pair
€16.00 *
Plug steering stop Plug steering stop
€2.50 *
Brake pedal "enduro"-frame Brake pedal "enduro"-frame
Brake pedal for enduro-frame. The pivot point lies in front of the vertical frame-tube.
€89.00 *
Chaintensioner bolts TC/TE/SM 610/570 Chaintensioner bolts TC/TE/SM 610/570
Bolts for original swingarm M8 - 10mm head
€5.00 *
Brake cable stainless steel with ball joint Brake cable stainless steel with ball joint
Stainless steel cable with precise ball joint incl. bolt
€39.00 *
Brake plate for rear-hub MY 86 Brake plate for rear-hub MY 86
To use monoshock-wheels in twinshock frames no cams or shoes
€129.00 *
Magnet for cylinder Magnet for cylinder
Magnet for original cylinder 4-stroke
€22.00 *
Gasket exhaust-flange 4mm copper pair Gasket exhaust-flange 4mm copper pair
€5.00 *
Air-cooled cylinder for TC/TE 510 Air-cooled cylinder for TC/TE 510
New Cylinder - casted to modern standards. Bore up to 98mm or maybe more. Nicasil-coated, for this cylinder you need a crank-case of a 610 or 570
€899.00 *
Clutch cover for 2 and 4-strokes from 1982 Clutch cover for 2 and 4-strokes from 1982
Billet clutch cover with sleeves for all shafts. With breather for 2-strokes or without. For a black version contact us.
€379.00 *
Cylinder-head nuts Cylinder-head nuts
Steel hardend. Complete set 4 pieces
€28.00 *
Chain-tensioner complete with wheel Chain-tensioner complete with wheel
€59.00 *
Brake plate TLS for hubs 83 or later Brake plate TLS for hubs 83 or later
Twin-leading-shoe brake plate for newer hubs, to replace the original brake. Improved braking performance. Smoothed over for optimum braking. Available also to fit into forks with disc-brackets. Incl. levers and cams. Shoes optional.
From €179.00 *
Cam for brake plate Cam for brake plate
€25.00 *
Intake manifold 4-stroke Intake manifold 4-stroke
Intake manifold for a tube. Trimmable for new and old intake.
€65.00 *
Swingarm-adapter 12mm-14mm Swingarm-adapter 12mm-14mm
Adapter
€8.00 *
Swingarm needle-bearings 20x26x20 2RS 4 pieces Swingarm needle-bearings 20x26x20 2RS 4 pieces
Sealed bearings - european brand
€33.00 *
Footpegs Husqvrana with kit - bolts and springs Footpegs Husqvrana with kit - bolts and springs
includes springs and bolts
€73.00 *
Cylinder head air-cooled TC/TE 510 Cylinder head air-cooled TC/TE 510
New cylinder-head, flow-optimized, with bigger valves. Fits original cylinder or our new cylinder (610 or 570-case needed) The power-diagram is based on 98mm bore and a Keihin FCR-39. We need a rocker-cover to swap, because the...
€1,700.00 *
Husky ignition-cover 4-stroke twinshock Husky ignition-cover 4-stroke twinshock
€149.00 *
Husky - ignition cover 2-stroke MY 81-88 Husky - ignition cover 2-stroke MY 81-88
€79.00 *
Complete exhaust 2-in-2 stainless steel with alloy mufflers Complete exhaust 2-in-2 stainless steel with...
2-in-2 exhaust for air-cooled 4-strokes Stainless-steel tubes with aluminium mufflers. Requires a modified air-box - you can get one from us.
€850.00 *
Airbox Aluminium Twinshock Airbox Aluminium Twinshock
This airbox is needed if you want to mount our 2-in-2 ehaust. Aluminium - very light
€130.00 *
Spacer rear wheel Spacer rear wheel
€19.00 *
1 From 3
Viewed