Products from Maico

Maico
Close filters
1 From 3
No results were found for the filter!
Spare pulley and sleeve for chain guide MY 77 - 81 Spare pulley and sleeve for chain guide MY 77 - 81
€5.40 *
Brakepedal MY 81 Brakepedal MY 81
Brake pedal for MY 81 CNC-machined. The pedal can be modified to fit up to MY 84
€85.32 *
Wheelset complete 21/19 or 21/18 Wheelset complete 21/19 or 21/18
Wheelset built with Excel-rims in black, silver or gold or blue Front-wheel 21-inch with 160mm-hub, version as you like. Brake-plate TLS 160mm complete, with shoes, springs, cams, levers. Rear-wheel, hub as you like and 18 or 19 inch...
From €1,350.00 *
Strud-Kit for MAICO fork and TLS-brake Strud-Kit for MAICO fork and TLS-brake
To fit our TLS-brake into a MAICO fork The bushing and the spacer may need to be adjusted, depending on the triple clamps
€68.04 *
Gliders swingarm MY 81 - pair Gliders swingarm MY 81 - pair
€10.80 *
Rear axle with nut Rear axle with nut
€52.92 *
Knurled nut - rear brake Knurled nut - rear brake
€5.40 *
Maico footpegs until MY 78 Maico footpegs until MY 78
€106.92 *
Maico footpegs MY 81-87 stainless steel with Kit Maico footpegs MY 81-87 stainless steel with Kit
includes springs and bolts
€99.00 *
Lock-washers Lock-washers
Lock-washers 1. For clutch 3-shaft engine (inner hexagonal) 2. Primary gear 3-shaft engine (inner toothing) 3. Clutch 2-shaft engine (outer extensions)
From €3.08 *
Spring for rear brake Spring for rear brake
Retaining spring for rear brake, stainless, improved tension compared to original. Left or right version available - right original, left for conversions with chain on the left side.
€16.20 *
Front wheel incl. TLS brake plate Front wheel incl. TLS brake plate
Wheel built with Excel-rims in black, silver or gold or blue 160mm hub, version as you like. Brake-plate TLS 160mm complete, with shoes, springs, cams, levers. Also available to fit in a fork with disc-brake brackets.
From €650.00 *
Steering stoppers Steering stoppers
€12.96 *
Spacer rear wheel Spacer rear wheel
€6.48 *
Chain glider MY. 82 - 84 Chain glider MY. 82 - 84
€11.88 *
Nut for steering column MY 75 - 87 Nut for steering column MY 75 - 87
€6.48 *
Rear hub Rear hub
Made to modern standards Available in three Versions, ribbed like the original, smoothed or black powder-coated. Incl. wheel-bearings and spacers
From €276.98 *
TLS brake plate 160mm - complete TLS brake plate 160mm - complete
CNC-machined brake plate for our special front hub with 160mm diameter. Also available with reinforcement for conversions to forks with disc-brake mounts. Complete with cam, levers and pads. Smoothed over for optimal brake-performance....
From €224.66 *
Front axle with nut Front axle with nut
€57.24 *
Swingarm axle with nuts Swingarm axle with nuts
€28.08 *
Triple clamp 41,7mm non-cranked Triple clamp 41,7mm non-cranked
CNC-machined triple clamps 38mm for modelyear 76-79. Complete with handlebar mounts 22mm and steering tube made of aluminium AL7075. Incl. two lock-nuts M26 x 1, leg distance 185mm This Version is used to convert BMWs oder older Maicos...
€324.00 *
Triple clamp MY 81-87, leg distance 200mm, triple bolted Triple clamp MY 81-87, leg distance 200mm,...
CNC-machined triple clamps for modelyear 81-87. Complete with handlebar mounts 22mm and steering tube made of aluminium AL7075. Incl. two lock-nuts M26 x 1. Leg distance 200mm, triple bolted
From €389.83 *
Intake manifold 10° reed-valve cylinder Intake manifold 10° reed-valve cylinder
For 490cc reed-valve cylinder or conversions of older model to reed-valve
€106.92 *
Needle-Bearing Swingarm Maico - Pair Needle-Bearing Swingarm Maico - Pair
€15.12 *
1 From 3
Viewed